Page 49 - LIT-18626-12-64

UF4G14E0.book Page 43 Wednesday, July 10, 2019 11:14 AM

Instrument operation

EJU43760 turn off and enter a standby state. When the
Multifunction information
engine is started again, the displays return to
center their state before the center turned off, and
The multifunction information center displays then the center starts to operate normally.
various watercraft information. EJU35027
Information display
1 2 3 The information display shows watercraft op-
erating conditions.
1 2

4
1 “UNLOCK” indicator light (VX Deluxe /
VX Cruiser / VX Limited)
2 Information display 3 4 5 6 7 8
3 “L-MODE” indicator light (VX Deluxe / 1 Tachometer
VX Cruiser / VX Limited)
2 Speedometer
4 “WARNING” indicator light
3 Oil pressure warning indicator
Multifunction information center initial op- 4 Engine overheat warning indicator
eration 5 Check engine warning indicator
When the multifunction information center is 6 Shift indicator (VX / VX Deluxe /
VX Cruiser / VX Limited)
activated, all of the display segments come
7 Fuel level warning indicator
on. After 2 seconds, the warning indicators in
8 Fuel level meter
the information display go off, and then the
EJU43832
center starts to operate normally. Speedometer
If only the multifunction information center is The speedometer shows the watercraft
activated, the “WARNING” indicator light speed against water.
blinks once.
TIP:
VX Deluxe / VX Cruiser / VX Limited: The
“UNLOCK” indicator light also comes on as
part of the initial operation.
The “UNLOCK” indicator light will go off
when the engine is started.
Multifunction information center standby
state
If the multifunction information center does 1
not receive any operation input within 25 sec- 1 Speedometer
onds after the engine stops, the center will

43