Page 58 - LIT-18626-12-85

UF3X12E0.book Page 52 Friday, May 22, 2020 10:00 AM

Instrument operation

start the engine again, or push the “ALARM running, the voltage display of the voltmeter
MUTE” button. blinks.

1
MPH

0 100%
10.8V x100 F
RPM
1 “ALARM MUTE” button
If the battery voltage warning is activated,
TIP: have the watercraft serviced by a Yamaha
If the “ALARM MUTE” button was pushed to dealer as soon as possible.
stop the buzzer, the buzzer will start sound- Check engine warning “ ”
If a sensor malfunction or a short circuit is de-
ing again after 5 minutes.
tected, the warning bar is shown instead of
Fuel level warning
If the amount of remaining fuel is less than the tachometer value display, “ ” is shown,
10%, the percentage display of the fuel level and the buzzer sounds intermittently.
meter changes to “Low”, and the buzzer
sounds intermittently.

If the check engine warning is activated, im-
mediately reduce the engine speed, return to
shore, and have a Yamaha dealer check the
MPH engine.
TIP:
0 Low
Tap “ ” to display a description of the
13.6V x100 F warning in the center display.
RPM
Engine overheat warning “ ”
If the fuel level warning is activated, refill the If the engine temperature rises significantly,
fuel tank as soon as possible. (See page 62 the warning bar is shown instead of the ta-
for information on filling the fuel tank.) chometer value display, “ ” and “ ” are
Battery voltage warning shown, and the buzzer sounds continuously.
If the battery voltage is less than 12 volts or
more than 18 volts when the engine is not

52