Page 71 - LIT-18626-12-85

UF3X12E0.book Page 65 Friday, May 22, 2020 10:00 AM

Operation and handling requirements

(3) Remove the dipstick and wipe it clean. (6) Loosen the engine oil filler cap and re-
move it.

1

1

1 Dipstick
(4) Insert the dipstick back into the dipstick 1 Engine oil filler cap
tube completely. Remove the dipstick (7) Slowly add engine oil.
again and make sure that the engine oil TIP:
level is between the minimum and maxi- The difference between the minimum and
mum level marks. maximum level marks on the dipstick is equal
to approximately 1 L (1.06 US qt, 0.88 Imp.qt)
of engine oil.
(8) Wait approximately 5 minutes to allow
the engine oil to settle, and then check
1 the engine oil level again.
(9) Repeat steps 3–8 until the engine oil is at
2
the proper level.
(10) Securely install the engine oil filler cap by
tightening it until it stops.
(11) Securely install the seats in their original
1 Maximum level mark
positions.
2 Minimum level mark
(5) If the engine oil level is significantly
above the maximum level mark, consult
a Yamaha dealer. If the engine oil level is
below the minimum level mark, add en-
gine oil.

65