Page 81 - LIT-18626-12-85

UF3X12E0.book Page 75 Friday, May 22, 2020 10:00 AM

Pre-operation checks

than 15 seconds without supplying water, and down properly and that the trim setting
otherwise the engine could overheat. indicator and displayed setting level change
according to the operation of the switches.
Check the start switch, the engine stop
(See page 45 for information on turning on
switch, and the engine shut-off switch for
the multifunction information center without
proper operation. (See pages 31 to 31 for in-
starting the engine and page 37 for informa-
formation on operating each switch.)
tion on the electric trim system.)
1 2 3

0
4
5
1 Clip
EJU40102
2 Engine shut-off switch
Storage compartment checks
3 Start switch
Make sure that the storage compartments
4 Engine stop switch
are not damaged and that water has not col-
5 Engine shut-off cord (lanyard)
lected in the compartments. (See page 57 for
To check the operation of the switches: information on the storage compartments.)
(1) If the lock mode is selected for the EJU41082
Yamaha Security System setting, select Fire extinguisher holder, cover, and band
the unlock mode. (See page 30 for checks
Make sure that the fire extinguisher holder,
Yamaha Security System setting proce-
cover, and band are not damaged and that
dures.)
the cover is securely held in place using the
(2) Push the start switch to make sure that
band. (See page 61 for information on the fire
the engine starts.
extinguisher holder, cover, and band.)
(3) As soon as the engine starts running,
push the engine stop switch to make
sure that the engine stops immediately.
(4) Restart the engine, and then pull the en-
gine shut-off cord (lanyard) to remove
the clip from the engine shut-off switch
to make sure that the engine stops im-
mediately.
EJU45370
Electric trim system check
Turn on the multifunction information center,
and then operate the “TRIM/T.D.E.” switch-
es. Check that the jet thrust nozzle moves up

75