Page 45 - LIT-18626-12-86

UF3V12E0.book Page 39 Wednesday, June 3, 2020 2:38 PM

Watercraft operation

EJU40002 increase. The engine speed can be ad-
Watercraft operation modes
justed to two levels: +1 and +2.
EJU45061
Reverse assist 1
The reverse assist is a function for temporar-
ily increasing the engine speed when moving
in reverse, such as to enter the water
smoothly when launching the watercraft from
a trailer.
This function operates after the engine is
started and only if the watercraft is not shifted
into forward.
1 RiDE lever
TIP:
Once the watercraft is shifted into forward af-
ter the engine is started, the reverse assist
cannot be operated. 1
Activating and deactivating the reverse
assist 2
The activation of the reverse assist can be
confirmed by the reverse assist indicator on
the multifunction information center.

1 “SPEED CONTROL” up switch
2 “SPEED CONTROL” down switch
MPH To deactivate the reverse assist:
Perform one of the following operations. The
Reverse Assist +2
0 100% beeper sounds two times and the reverse as-
sist indicator disappears when the reverse
13.6V x100 R
RPM assist is deactivated.
1 2  Relax your grip on the RiDE lever.
1 Reverse assist indicator  Push the “SPEED CONTROL” down switch
2 Reverse assist level when the reverse assist level is set to +1.
To activate the reverse assist:  Squeeze the throttle lever.
EJU45071
(1) Start the engine.
T.D.E. (thrust directional enhancer)
(2) Squeeze the RiDE lever to the fully open The T.D.E. is a function for slightly lifting or
position, and then push the “SPEED lowering the reverse gate from the neutral po-
CONTROL” up switch. Once the beeper sition to operate the watercraft at very low
sounds once and the reverse assist indi- speeds when the engine is running at idling
cator is displayed, the engine speed will speed.

39