Page 47 - LIT-18626-12-86

UF3V12E0.book Page 41 Wednesday, June 3, 2020 2:38 PM

Watercraft operation

Activating and deactivating the no-wake tings: “No Wake –1”, “No Wake” (stan-
mode dard setting), and “No Wake +1”.
The activation of the no-wake mode can be To deactivate the no-wake mode:
confirmed by the no-wake mode indicator on Perform one of the following operations. The
the multifunction information center. beeper sounds two times and the no-wake
mode indicator disappears when the no-
wake mode is deactivated.
 Push the “NO-WAKE MODE” switch.
 Squeeze the throttle lever.
MPH  Squeeze the RiDE lever.

No Wake +1 TIP:
0 100%
The no-wake mode is also deactivated when
13.6V x100 F the engine is stopped.
RPM
EJU45031
1 2 Drive control mode
1 No-wake mode indicator The drive control mode is a function for set-
2 No-wake mode level
ting the maximum watercraft speed and ac-
To activate the no-wake mode: celeration for stable towing and to support
(1) Shift into neutral, or release the throttle inexperienced operators.
lever and let the engine speed return to The maximum watercraft speed can be se-
idle. lected from three settings and the accelera-
(2) Push and hold the “NO-WAKE MODE” tion can be selected from two settings.
switch. Once the beeper sounds three TIP:
times and the no-wake mode indicator is The watercraft speed setting is a target value.
displayed, the no-wake mode is activat- The actual watercraft speed may vary de-
ed. pending on the operating conditions.

1 Activating the drive control mode
Activation of the drive control mode can be
confirmed by the drive control mode indica-
2
tor on the multifunction information center.
3 When the drive control mode is activated, the
drive control mode indicator is shown in light
blue.

1

1 “NO-WAKE MODE” switch
2 “SPEED CONTROL” up switch 1 Drive control mode indicator
3 “SPEED CONTROL” down switch
To activate the drive control mode:
(3) Push the “SPEED CONTROL” up switch (1) Release the throttle lever and let the en-
or “SPEED CONTROL” down switch to gine speed return to idle.
adjust the engine speed to three set-

41