Page 51 - LIT-18626-12-86

UF3V12E0.book Page 45 Wednesday, June 3, 2020 2:38 PM

Instrument operation

EJU45110  While pushing the engine stop switch,
Multifunction information
push the start switch.
center Turning off the multifunction information
The multifunction information center displays center
various watercraft information. If the multifunction information center does
The multifunction information center is a not receive any operation input within 25 sec-
touch screen that you can touch directly to onds after the engine stops or if 3 minutes
turn the various functions on or off or change has elapsed after the engine stops, the center
settings. turns off.
In addition, the language and display units TIP:
shown can be changed. (See page 49 for in- The multifunction information center turns off
formation on changing the language and dis- 3 minutes after the engine stops even if there
play units.) In the illustrations in this manual, is operation input.
English is used for the language and US units Message indicating that operation input
are used for the display units. cannot be received
EWJ01980
If “Turn OFF Engine”, “Engine Comm Error”,
or other message appears in red characters
For safety, do not touch the multifunction during touch operation, the operation input
information center while the watercraft is cannot be received because the input condi-
moving. Otherwise, you could lose control tions are not satisfied.
of the watercraft, which may lead to an ac- Perform the operation again according to the
cident. displayed message, or stop the engine to
turn off the multifunction information center,
TIP:
and then turn on the center again. If the mes-
The multifunction information center does not
sage remains displayed, consult a Yamaha
receive operation input while the watercraft is
dealer.
moving. Before operating the multifunction
information center, stop the watercraft and
check the area around you to make sure it is Turn OFF Engine
safe to operate the center.
Turning on the multifunction information ON OFF
center
When the start switch is pushed, the multi-
Save
function information center turns on. After the
logo display appears for a few seconds, the
home screen is displayed and the touch
screen can be operated by touching it.
TIP:
Perform one of the following operations to
turn on the multifunction information center
without starting the engine.
 Push the start switch briefly.

45