Page 80 - LIT-18626-12-86

UF3V12E0.book Page 74 Wednesday, June 3, 2020 2:38 PM

Pre-operation checks

EJU40363 throttle lever returns automatically to its fully
Adjustable tilt steering system checks
Operate the adjustable tilt steering system closed (idle) position when released.
several times to make sure that operation is
smooth throughout the whole range. Also,
make sure that the handlebars are securely
locked in place. (See page 33 for adjustable
tilt steering system operation procedures.)

EJU45350
Yamaha Security System check
Make sure that the Yamaha Security System
operates properly. (See page 30 for Yamaha
Security System setting procedures.)
EJU32664
Engine shut-off cord (lanyard) check
EJU43213
RiDE lever checks Make sure that the engine shut-off cord (lan-
Operate the RiDE lever several times to make yard) is not damaged. If the cord is damaged,
sure that operation is smooth throughout the replace it. WARNING! Never try to repair
whole range. Also, make sure that the RiDE the engine shut-off cord (lanyard) or tie it
lever returns automatically to its fully closed together. The engine shut-off cord (lan-
position when released. yard) may not pull free when the operator
falls off, allowing the watercraft to conti-
nue to run and cause an accident. [EWJ01221]

EJU42181
Throttle lever checks
Operate the throttle lever several times to
EJU32676
make sure that operation is smooth through- Switch checks
out the whole range. Also, make sure that the ECJ01311
Do not run the engine over 4000 r/min on
land. Also, do not run the engine for more

74