Page 45 - LIT-18626-12-87

UF3Y14E0.book Page 39 Friday, June 12, 2020 10:50 AM

Instrument operation

EJU44570 EJU35027
Multifunction information Information display
center The information display shows watercraft op-
erating conditions.
The multifunction information center displays
various watercraft information. 1 2 3 4 5 6
1 2

8 7
1 Fuel level meter
2 Shift indicator (EX DELUXE / EX LIMITED)
1 Information display
3 Engine overheat warning indicator
2 “WARNING” indicator light
4 Check engine warning indicator
Multifunction information center initial op- 5 Tachometer / hour meter / voltmeter
eration 6 Oil pressure warning indicator
When the multifunction information center is 7 Fuel level warning indicator
activated, all of the display segments come 8 Speedometer
on. After 2 seconds, the warning indicators in EJU43832
the information display go off, and then the Speedometer
center starts to operate normally. The speedometer shows the watercraft
Multifunction information center standby speed against water.
state
If the multifunction information center does
not receive any operation input within 30 sec-
onds after the engine stops, the center will
turn off and enter a standby state. When the
engine is started again, the displays return to
their state before the center turned off, and
then the center starts to operate normally.
1
1 Speedometer
By switching the display units, the speed can
be shown in kilometers per hour “km/h” or
miles per hour “MPH”.
TIP:
“MPH” is selected as the display unit at the
Yamaha factory.

39