Page 91 - LIT-18626-12-87

UF3Y14E0.book Page 85 Friday, June 12, 2020 10:50 AM

Care and storage

(3) Release the hooks on the port side of the engine is hot. The sprayed substance
air filter case, and remove the air filter or propellants could catch fire. [EWJ00262]
case cover.

2
3
1
4
5 1

1 Intake opening
(5) Place the air filter case cover in its origi-
nal position, and then fit the hooks onto
the cover.
TIP:
Make sure that the air filter case cover is se-
curely installed.
(6) Fasten the fuel hose to the holder using
the plastic tie.
(7) Make sure that the area around the wa-
1 Hook tercraft is clear, and then start the engine
2 Air filter case cover in a well-ventilated area and let it run at
3 Fuel hose idle for 15 seconds. (See page 31 for in-
4 Holder
formation on starting the engine.)
5 Plastic tie
(8) Stop the engine.
(4) Spray a rust inhibitor such as Yamalube (9) Securely install the fire extinguisher hold-
Stor-Rite Engine Fogging Oil into the in- er and seat in their original positions.
take opening for 3 seconds. WARNING!
Do not spray flammable rust inhibitor
products on engine surfaces while the

85