Page 66 - LIT-18626-12-88

UF4L12E0.book Page 60 Thursday, June 4, 2020 2:02 PM

Pre-operation checks

lever returns automatically to its fully closed falls off, allowing the watercraft to conti-
position when released. nue to run and cause an accident. [EWJ01221]

EJU42181 EJU40692
Throttle lever checks Switch checks
Operate the throttle lever several times to ECJ01311
make sure that operation is smooth through-
out the whole range. Also, make sure that the Do not run the engine over 4000 r/min on
throttle lever returns automatically to its fully land. Also, do not run the engine for more
closed (idle) position when released. than 15 seconds without supplying water,
otherwise the engine could overheat.

Check the start switch, the engine stop
switch, and the engine shut-off switch for
proper operation. (See pages 30 to 30 for in-
formation on operating each switch.)
1

3

EJU32664
Engine shut-off cord (lanyard) check 4
Make sure that the engine shut-off cord (lan-
yard) is not damaged. If the cord is damaged,
replace it. WARNING! Never try to repair 2 5
the engine shut-off cord (lanyard) or tie it
together. The engine shut-off cord (lan- 1 Start switch
2 Engine stop switch
yard) may not pull free when the operator
3 Engine shut-off switch
4 Clip
5 Engine shut-off cord (lanyard)
To check the operation of the switches:
(1) Push the start switch to make sure that
the engine starts.

60