Page 86 - LIT-18626-12-88

UF4L12E0.book Page 80 Thursday, June 4, 2020 2:02 PM

Care and storage

 Steering cable (jet thrust nozzle end) To rustproof the internal engine components:
(1) Remove the seat and fire extinguisher
holder. (See page 42 for seat removal
and installation procedures and page 47
for information on the fire extinguisher
holder.)
(2) Remove the plastic tie that is fastening
the fuel hose to the holder on the star-
board side of the air filter case.
(3) Release the hooks on the port side of the
air filter case, and remove the air filter
 Shift rod (reverse gate end) and ball joint case cover.
2
3
1
4
5

TIP:
Disconnect the shift rod from the ball joint be-
fore lubricating.
EJU44781
Rustproofing
1 Hook
Rustproofing the hull, deck, and engine
2 Air filter case cover
Spray metallic parts of the hull, deck, and en-
3 Fuel hose
gine with a rust inhibitor such as Yamalube
4 Holder
Silicone Protectant & Lubricant. 5 Plastic tie
Rustproofing the internal engine compo-
(4) Spray a rust inhibitor such as Yamalube
nents
Stor-Rite Engine Fogging Oil into the in-
Rustproof the internal engine components
take opening for 3 seconds. WARNING!
with a rust inhibitor such as Yamalube Stor-
Do not spray flammable rust inhibitor
Rite Engine Fogging Oil.
products on engine surfaces while the
80