Page 78 - LIT-18626-12-89
P. 78

UF4R10E0.book  Page 73  Tuesday, August 4, 2020  1:32 PM



                        Maintenance


                                                               Initial    Thereafter every
                                                                               100    200
                                                                     50 hours
                               Item             Operation              or 12   hours or  hours or   Page
                                                              10 hours         12      24
                                                                      months
                                                                        *1   months  months
                                                                               *1      *1
                         Handlebar pivot   Check and adjust      √              √            —
                         shaft
                         Steering friction  Check and adjust     √              √            —
                         Throttle cable   Check and adjust       √              √            —
                                          Check hoses for clogs
                                          and damage, check
                         Jet vacuum bilge                                       √            —
                                          clamps, and clean bilge
                                          strainer
                         Stern drain plugs  Check O-rings                       √            —
                                          Check for corrosion, and
                         Anode                                                        √ *2   —
                                          clean
                         Valve clearance  Check and adjust                            √ *2   —
                                          Check for cracks, inden-
                         Rubber coupling  tations, looseness, and                      √     —
                                          noise
                                          Check for damage and
                         Engine mount                                                  √     —
                                          peeling
                         Nuts and bolts   Check                  √              √            —
                        *1: Whichever comes first.
                        *2: Check every 200 hours.
                        Perform the pre-operation checks and  post-operation checks  before  performing  periodic
                        maintenance.

























                        73
   73   74   75   76   77   78   79   80   81   82   83