Page 46 - LIT-18626-12-90

UF4P10E0.book Page 40 Friday, July 31, 2020 8:50 AM

Watercraft operation

This function can be used only when the wa- “TRIM/T.D.E.” switch to move in reverse
tercraft is in neutral. at a very low speed.
TIP:
While the watercraft is shifted into forward,
the “TRIM/T.D.E.” switch controls the electric
trim system. (See page 37 for information on
the electric trim system.)
Activating and deactivating the T.D.E.
The activation of the T.D.E. can be confirmed
by the T.D.E. indicator on the multifunction 1
information center.
2 T.D.E. FORWARD 1 “TRIM/T.D.E.” switch
3 T.D.E. REVERSE TIP:
RPM
x1000 While the T.D.E. is activated, the “N” (neutral)
shift indicator will be displayed and “0” will be
MPH
displayed on the speedometer.
T.D.E. FORWARD To deactivate the T.D.E.:
Perform one of the following operations. The
14.3V
T.D.E. indicator disappears and the T.D.E. is
1 deactivated.
1 T.D.E. indicator
 Squeeze the throttle lever.
2 Forward operation at a very low speed
 Squeeze the RiDE lever.
3 Reverse operation at a very low speed
 Push and hold the “CRUISE/NO WAKE”
To activate the T.D.E.: switch.
(1) Shift into neutral.  While moving forward at a very low speed,
(2) Push the upper side of the “TRIM/T.D.E.” push the lower side of the “TRIM/T.D.E.”
switch to move forward at a very low switch.
speed or push the lower side of the  While moving in reverse at a very low
speed, push the upper side of the
“TRIM/T.D.E.” switch.
TIP:
The T.D.E. is also deactivated when the en-
gine is stopped.
EJU45910
No-wake mode
The no-wake mode is a function that main-
tains the engine speed at a fixed setting for
operating the watercraft at low speeds. While
the watercraft is operating in no-wake mode,
the engine speed can be adjusted to one en-

40