Page 52 - LIT-18626-12-90

UF4P10E0.book Page 46 Friday, July 31, 2020 8:50 AM

Instrument operation

EJU45960 (See page 50 for information about the warn-
Display
ing descriptions.)
The display is configured as shown below.
1 2
1

RPM
x1000
RPM
x1000
MPH
MPH
14.3V
14.3V
3 4 5
2
1 Trim setting indicator
1 Screen tab bar
2 Fuel level meter
2 Center display
3 Voltmeter
4 Tachometer
5 Shift indicator
Trim setting indicator
The position of this indicator indicates the
1 trim setting of the jet thrust nozzle. (See page
1 Warning bar 37 for information on the trim setting.)
Screen tab bar Voltmeter
When each symbol is selected, the watercraft The voltmeter shows the battery voltage.
information, function settings, and other in- When the battery voltage is normal, the volt-
formation are shown in the center display. meter displays approximately 14 volts.
(See page 47 for information on each screen.) If the battery voltage has dropped or risen
Center display significantly, the battery voltage warning will
The center display shows the watercraft in- activate and the voltage display will blink.
formation, function settings, and other infor- (See page 51 for information on the battery
mation according to the symbol on the voltage warning.)
screen tab bar that is selected. Tachometer
Warning bar The tachometer shows the engine speed us-
The warning bar is shown when an error or ing the numbers ×1000 RPM (r/min) and the
malfunction is detected. number of display segments.
Push the “OK” button of the touchpad control Shift indicator
when the warning symbol is displayed to This indicator shows the reverse gate shift
show the warning description, error code, positions: “F” (forward), “N” (neutral), and “R”
and other information in the center display. (reverse). (See page 35 for shifting proce-
dures.)

46