Page 37 - LIT-18626-12-91

UF4M10E0.book Page 31 Tuesday, August 4, 2020 11:35 AM

Control function operation

than 15 seconds without supplying water, EJU31164
Engine shut-off switch “ ”
otherwise the engine could overheat.
The engine shut-off switch automatically
The engine start/stop switch (red button) stops the engine when the clip, on the end of
starts the engine when the switch is pushed the engine shut-off cord (lanyard), is removed
while the engine is stopped, and stops the from the switch, such as if the operator falls
engine when the switch is pushed while the off the watercraft.
engine is running. Insert the clip under the engine shut-off
Release the engine start/stop switch as soon switch before starting the engine.
as the engine starts to run. If the engine does
not start in 5 seconds, release the engine 1
start/stop switch, wait 15 seconds, and then
try again. NOTICE: Never push the engine
start/stop switch while the engine is run-
ning. Do not operate the engine start/stop
switch for more than 5 seconds, otherwise
the battery will be discharged and the en- 2
gine will not start. Also, the starter motor
3
could be damaged. [ECJ02860]
1 Engine shut-off switch
2 Clip
3 Engine shut-off cord (lanyard)
When the engine is not running, remove the
clip from the engine shut-off switch to pre-
vent accidental starting or unauthorized op-
eration by children or others.

1

1 Engine start/stop switch
The engine will not start under any of the fol-
lowing conditions:
 Lock mode of the Yamaha Security System
has been selected. (See page 30 for
Yamaha Security System setting proce-
dures.)
 Clip is removed from the engine shut-off
switch.
 Throttle lever is squeezed.
 Throttle lever is malfunctioning.
 RiDE lever is squeezed.
 RiDE lever is malfunctioning.

31