Page 39 - LIT-18626-12-91

UF4M10E0.book Page 33 Tuesday, August 4, 2020 11:35 AM

Control function operation

To adjust the handlebar position: (2) Make sure that the tilt lever returns to its
(1) Pull the tilt lever up to disengage the han- original position and that the handlebars
dlebar lock, and then move the handle- are securely locked in place.
bars back or forth to the desired position.
WARNING! Never pull the tilt lever dur-
ing operation, otherwise the handle-
bars may suddenly change position,
which may lead to an accident. [EWJ00042]

1
EJU35975
Cooling water pilot outlet
When the engine is running, some of the
cooling water that is circulated in the engine
is discharged from the cooling water pilot
1 Tilt lever outlet.

1
1 Cooling water pilot outlet
There is a cooling water pilot outlet on the
port (left) side of the watercraft. To check for
proper operation of the cooling system, make
sure that water is being discharged from the
cooling water pilot outlet. If water is not being
discharged from the outlet, stop the engine
and check the jet intake for clogging. (See
page 102 for information on the jet intake.)

33