Page 43 - LIT-18626-12-91

UF4M10E0.book Page 37 Tuesday, August 4, 2020 11:35 AM

Watercraft operation

TIP: This function can be used only for forward
If the RiDE lever is squeezed while the throttle operation of the watercraft.
lever is squeezed, the watercraft will slow TIP:
down, and once stopped, move in reverse.  When the watercraft is moving in reverse or
To shift into neutral from forward: is in neutral, the jet thrust nozzle will auto-
(1) Release the throttle lever. matically change to the neutral trim setting.
(2) Lightly squeeze and release the RiDE le- When the watercraft is shifted into forward,
ver. The “N” (neutral) shift indicator will the jet thrust nozzle will automatically
be displayed. change to the selected trim setting.
 While the watercraft is in neutral, the
“TRIM/T.D.E.” switch controls the forward
and reverse operation of the T.D.E. (thrust
direction enhancer). (See page 39 for infor-
mation on the T.D.E.)
 The watercraft performance characteristics
according to the trim angle change de-
TRIM
T.D.E
pending on the operating conditions.
Confirming the trim setting
The trim setting can be confirmed by the trim
setting indicator on the multifunction infor-
mation center.
1
RPM
x1000
MPH
RPM
x1000
14.3V
MPH
1
1 “N” (Neutral position)
14.3V
TIP: 1 Trim setting indicator
If the RiDE lever is squeezed continuously,
To change the trim setting:
the reverse gate will move to the reverse po-
(1) Shift into forward.
sition.
(2) Push the upper side of the “TRIM/T.D.E.”
EJU45880
Electric trim system switch to increase the trim setting and
The electric trim system is a function for raise the bow, or push the lower side of
changing the vertical angle of the jet thrust the “TRIM/T.D.E.” switch to decrease the
nozzle to change the trim angle and perfor- trim setting and lower the bow. The trim
mance characteristics of the watercraft.

37