Page 48 - LIT-18626-12-91

UF4M10E0.book Page 42 Tuesday, August 4, 2020 11:35 AM

Watercraft operation

EJU45921 To select the maximum watercraft speed and
Drive control mode
acceleration settings:
The drive control mode is a function for set-
(1) Select “Speed/Acceleration”.
ting the maximum watercraft speed and ac-
(2) Select the maximum watercraft speed
celeration for stable towing, and to adjust the
setting under “Speed” and the accelera-
trim angle automatically.
tion setting under “Accel.”
The maximum watercraft speed can be se-
lected from three settings and the accelera- 1 2
tion can be selected from two settings.
Drive Control
Activating the drive control mode Speed Accel.
Activation of the drive control mode can be
High
confirmed by the drive control mode indica- Nomal
Middle
tor on the multifunction information center.
Low Slow
When the drive control mode is activated, the
drive control mode indicator is shown in light Save
yellow.
3
1 1 Maximum watercraft speed setting
2 Acceleration setting
3 “Save”
Drive Control (3) Select the “Save” button to complete the
settings and return to the previous dis-
Speed/Acceleration
play.
Auto Trim Activating the auto trim
The auto trim is activated, the trim angle is
Lock
automatically adjusted.
When the auto trim is activated, the drive
1 Drive control mode indicator
control mode indicator and “Auto Trim” are
To operate the watercraft using the drive con-
shown in light yellow.
trol mode:
(1) Release the throttle lever and let the en-
gine speed return to idle. Drive Control
(2) Activate each drive control mode.
(3) Squeeze the throttle lever. Speed/Acceleration
Selecting the drive control mode settings Auto Trim
The drive control mode settings for the maxi-
mum watercraft speed and acceleration are Lock
saved. In addition, the activation and settings
of the drive control mode can be locked to 1
prevent others from changing them. 1 “Auto Trim”
When the drive control mode is locked, a PIN
must be entered to operate the drive control
mode screen.

42