Page 36 - LIT-18626-12-92

UF4S10E0.book Page 30 Monday, September 28, 2020 1:50 PM

Control function operation

EJU31027 (3) Input each digit of the 4-digit PIN, and
Watercraft control functions
then push the “OK” button of the touch-
EJU45091
Yamaha Security System pad control.
The Yamaha Security System functions to
help prevent unauthorized use or theft of the
Enter PIN
watercraft. The lock and unlock modes of the
security system can be selected using the * * * *
engine lock screen of the multifunction infor- 1 2 3
mation center. The engine cannot be started 4 5 6
if the lock mode of the security system is se- 7 8 9
lected. The engine can only be started if the 0
unlock mode is selected.
TIP:
The Yamaha Security System setting can TIP:
only be selected while the engine is stopped. The default setting for the PIN is “1234”. The
EJU45870 PIN can also be changed. (See page 45 for in-
Yamaha Security System setting formation on changing the PIN.)
The Yamaha Security System setting can be
(4) To select the lock mode of the Yamaha
confirmed by the lock or unlock mode indica-
Security System, select “ON”. To select
tor on the multifunction information center.
the unlock mode, select “OFF”.
1
Engine Lock
ON
2
OFF

1 Lock mode indicator
2 Unlock mode indicator (5) The beeper sounds once when the lock
mode of the Yamaha Security System is
To select the lock or unlock mode of the
selected, and two times when the unlock
Yamaha Security System:
mode is selected.
(1) Stop the engine.
EJU46112
TIP: Engine start/stop switch “ / ”
The multifunction information center is turned ECJ01311
on, even if the engine start/stop switch is also
pushed briefly. Do not run the engine over 4000 r/min on
(2) Select the lock or unlock mode indicator land. Also, do not run the engine for more
on the multifunction information center.

30