Page 42 - LIT-18626-12-92

UF4S10E0.book Page 36 Monday, September 28, 2020 1:50 PM

Watercraft operation

EJU40003
TIP: Watercraft operation modes
If the RiDE lever is squeezed while the throttle
lever is squeezed, the watercraft will slow EJU45891
down, and once stopped, move in reverse. Reverse assist
To shift into neutral from forward: The reverse assist is a function for temporar-
(1) Release the throttle lever. ily increasing the engine speed when moving
(2) Lightly squeeze and release the RiDE le- in reverse, such as to enter the water
ver. The “N” (neutral) shift indicator will smoothly when launching the watercraft from
be displayed. a trailer.
This function operates after the engine is
started and only if the watercraft is not shifted
into forward.
TIP:
Once the watercraft is shifted into forward af-
ter the engine is started, the reverse assist
cannot be operated.
Activating and deactivating the reverse
assist
The activation of the reverse assist can be
confirmed by the reverse assist indicator on
the multifunction information center.

MPH
RPM MPH
RPM
Reverse Assist +2
14.3V
1 14.3V
1 “N” (Neutral position) 1 2
1 Reverse assist indicator
TIP:
2 Reverse assist level
If the RiDE lever is squeezed continuously,
the reverse gate will move to the reverse po- To activate the reverse assist:
sition. (1) Start the engine.
(2) Squeeze the RiDE lever to the fully open
position, and then push the upper side of
the “SPEED ADJUST” switch. Once the
beeper sounds three times and the re-
verse assist indicator is displayed, the
engine speed will increase. The engine

36