Page 44 - LIT-18626-12-92

UF4S10E0.book Page 38 Monday, September 28, 2020 1:50 PM

Watercraft operation

To deactivate the T.D.E.: Activating and deactivating the no-wake
Perform one of the following operations. The mode
T.D.E. indicator disappears and the T.D.E. is The activation of the no-wake mode can be
deactivated. confirmed by the no-wake mode indicator on
 Squeeze the throttle lever. the multifunction information center.
 Squeeze the RiDE lever.
 Push and hold the “CRUISE/NO WAKE”
switch.
 While moving forward at a very low speed, MPH
push the lower side of the “T.D.E.” switch.
 While moving in reverse at a very low RPM
speed, push the upper side of the “T.D.E.” No Wake +1
switch.
14.3V
TIP: 1 2
The T.D.E. is also deactivated when the en-
1 No-wake mode indicator
gine is stopped. 2 No-wake mode level
EJU45910
No-wake mode To activate the no-wake mode:
The no-wake mode is a function that main- (1) Shift into neutral, or release the throttle
tains the engine speed at a fixed setting for lever and let the engine speed return to
operating the watercraft at low speeds. While idle.
the watercraft is operating in no-wake mode, (2) Push and hold the “CRUISE/NO WAKE”
the engine speed can be adjusted to one en- switch. Once the beeper sounds three
gine speed each above and below the initial times and the no-wake mode indicator is
engine speed. displayed, the no-wake mode is activat-
This function can be used only when the wa- ed.
tercraft is in neutral, or when the watercraft is
shifted into forward and the engine is operat-
ing at idling speed.
TIP:
If the no-wake mode is activated when the
watercraft is in neutral, the watercraft will au-
tomatically shift into forward and the water-
craft will start moving at a low speed.
1

1 “CRUISE/NO WAKE” switch
(3) Push the upper side or the lower side of
the “SPEED ADJUST” switch to adjust
the engine speed to three settings: “No

38