Page 45 - LIT-18626-12-92

UF4S10E0.book Page 39 Monday, September 28, 2020 1:50 PM

Watercraft operation

Wake –1”, “No Wake” (standard setting), drive control mode indicator is shown in light
and “No Wake +1”. yellow.
1

Drive Control

Speed/Acceleration

Lock
1

1 “SPEED ADJUST” switch 1 Drive control mode indicator
To deactivate the no-wake mode: To operate the watercraft using the drive con-
Perform one of the following operations. The trol mode:
beeper sounds two times and the no-wake (1) Release the throttle lever and let the en-
mode indicator disappears when the no- gine speed return to idle.
wake mode is deactivated. (2) Activate each drive control mode.
 Push the “CRUISE/NO WAKE” switch. (3) Squeeze the throttle lever.
 Squeeze the throttle lever. Selecting the drive control mode settings
 Squeeze the RiDE lever. The drive control mode settings for the maxi-
TIP: mum watercraft speed and acceleration are
saved. In addition, the activation and settings
The no-wake mode is also deactivated when
of the drive control mode can be locked to
the engine is stopped.
prevent others from changing them.
EJU46340
Drive control mode When the drive control mode is locked, a PIN
The drive control mode is a function for set- must be entered to operate the drive control
ting the maximum watercraft speed and ac- mode screen.
celeration for stable towing. To select the maximum watercraft speed and
The maximum watercraft speed can be se- acceleration settings:
lected from three settings and the accelera- (1) Select “Speed/Acceleration”.
tion can be selected from two settings.
Activating the drive control mode
Activation of the drive control mode can be
confirmed by the drive control mode indica-
tor on the multifunction information center.
When the drive control mode is activated, the

39