Page 46 - LIT-18626-12-92

UF4S10E0.book Page 40 Monday, September 28, 2020 1:50 PM

Watercraft operation

(2) Select the maximum watercraft speed (3) Select “Lock”.
setting under “Speed” and the accelera- EJU45930
Cruise assist
tion setting under “Accel.”
The cruise assist is a function for maintaining
1 2 a desired engine speed within a fixed range
while operating the watercraft. Once the
Drive Control
Speed Accel. cruise assist is activated, the set engine
speed can be increased or decreased. How-
High
Nomal
ever, the adjustment is limited to a maximum
Middle
of five increments above or below the initial
Slow
Low
cruise assist setting.
Save
TIP:
3 The cruise assist can only be set between en-
1 Maximum watercraft speed setting gine speeds of approximately 3000 r/min and
2 Acceleration setting approximately 7000 r/min.
3 “Save” Activating and deactivating the cruise as-
(3) Select the “Save” button to complete the sist
settings and return to the previous dis- Activation of the cruise assist can be con-
play. firmed by the cruise assist indicator on the
Locking the drive control mode multifunction information center.
The drive control mode can be locked.
To lock the drive control mode:
(1) Select “Lock”.
(2) Input each digit of the 4-digit PIN, and MPH
then push the “OK” button of the touch-
pad control. RPM
Cruise Assist +4
14.3V
Enter PIN
1 2
* * * *
1 2 3 1 Cruise assist indicator
2 Cruise assist level
4 5 6
To activate the cruise assist:
7 8 9
(1) Operate the throttle lever until the de-
0
sired engine speed is reached.
(2) When the engine speed reaches the de-
sired cruise assist setting, push the
To unlock the drive control mode:
“CRUISE/NO WAKE” switch. Once the
(1) Select the drive control mode indicator.
beeper sounds three times and the
(2) Input each digit of the 4-digit PIN, and
then push the “OK” button of the touch-
pad control.

40