Page 49 - LIT-18626-12-92

UF4S10E0.book Page 43 Monday, September 28, 2020 1:50 PM

Instrument operation

EJU46290 (See page 47 for information about the warn-
Display
ing descriptions.)
The display is configured as shown below.
1
1

MPH
MPH
RPM
RPM
14.3V
14.3V
2 3 4
2
1 Fuel level meter
1 Screen tab bar
2 Voltmeter
2 Center display
3 Tachometer
4 Shift indicator
Voltmeter
The voltmeter shows the battery voltage.
When the battery voltage is normal, the volt-
1 meter displays approximately 14 volts.
1 Warning bar If the battery voltage has dropped or risen
Screen tab bar significantly, the battery voltage warning will
When each symbol is selected, the watercraft activate and the voltage display will blink.
information, function settings, and other in- (See page 47 for information on the battery
formation are shown in the center display. voltage warning.)
(See page 44 for information on each screen.) Tachometer
Center display The tachometer shows the engine speed and
The center display shows the watercraft in- the number of display segments.
formation, function settings, and other infor- Shift indicator
mation according to the symbol on the This indicator shows the reverse gate shift
screen tab bar that is selected. positions: “F” (forward), “N” (neutral), and “R”
Warning bar (reverse). (See page 34 for shifting proce-
The warning bar is shown when an error or dures.)
malfunction is detected. Fuel level meter
Push the “OK” button of the touchpad control The fuel level meter shows the amount of fuel
when the warning symbol is displayed to remaining in the fuel tank using the number of
show the warning description, error code, display segments.
and other information in the center display. If the amount of remaining fuel is low, the fuel
level warning will activate. (See page 47 for
information on the fuel level warning.)

43