Page 77 - LIT-18626-12-92

UF4S10E0.book Page 71 Monday, September 28, 2020 1:50 PM

Pre-operation checks

falls off, allowing the watercraft to conti- (See page 30 for information on operating
nue to run and cause an accident. [EWJ01221] each switch.)
1
2

3
1 Clip
EJU46050
Switch checks 2 Engine shut-off switch
ECJ01311
3 Engine shut-off cord (lanyard)
Do not run the engine over 4000 r/min on
land. Also, do not run the engine for more
than 15 seconds without supplying water,
otherwise the engine could overheat.

Check the engine start/stop switch and the
engine shut-off switch for proper operation.

1
1 Engine start/stop switch
To check the operation of the switches:
(1) If the lock mode is selected for the
Yamaha Security System setting, select
the unlock mode. (See page 30 for
Yamaha Security System setting proce-
dures.)
(2) Push the engine start/stop switch to
make sure that the engine starts.
(3) As soon as the engine starts running,
push the engine start/stop switch to
make sure that the engine stops immedi-
ately.
(4) Restart the engine, and then pull the en-
gine shut-off cord (lanyard) to remove
the clip from the engine shut-off switch

71