Page 25 - LIT-18626-12-93

UF4N10E0.book Page 18 Tuesday, September 29, 2020 8:02 AM

Safety information

contact with the rotating parts of the jet EJU30947
Wakeboarding and water-
pump.
skiing
You can use the watercraft for wakeboarding
or water-skiing if it has the seating capacity to
carry the operator, a rearward-facing spotter,
and the wakeboarder or water-skier when he
2 or she is not being pulled.
The watercraft must also have a cleat de-
signed to pull a ski rope; do not attach the
1
rope to any other location.
1 Intake grate
2 Jet thrust nozzle
1
 Stop the engine and remove the clip from
the engine shut-off switch before removing
any debris or weeds, which may have col-
lected around the jet intake.

2
1 Cleat
It is the watercraft operator’s responsibility to
1 be alert to the safety of the wakeboarder or
water-skier and others. Know and follow all
state and local regulations in effect for the
waters in which you will be operating.
The operator should be comfortable carrying
1 Clip passengers before attempting to pull a wake-
2 Engine shut-off switch boarder or water-skier.
The following are some important consider-
ations for minimizing risks while pulling a
wakeboarder or water-skier.
 The wakeboarder or water-skier should
wear an approved PFD, preferably a bright-
ly colored one so boat operators can see
the person being pulled.
 The wakeboarder or water-skier should
wear protective clothing. Severe internal in-
juries can occur if water is forced into body
cavities as a result of falling into the water.

18