Page 39 - LIT-18626-12-93

UF4N10E0.book Page 32 Tuesday, September 29, 2020 8:02 AM

Control function operation

EJU31154 start/stop switch, wait 15 seconds, and then
Engine stop switch “ ” (VX-C)
try again.
The engine stop switch (red button) stops the
engine when the switch is pushed.

1

1 1 Engine start/stop switch
The engine will not start under any of the fol-
1 Engine stop switch
lowing conditions:
EJU46112
Engine start/stop switch “ / ” (VX /  VX DELUXE / VX CRUISER / VX LIMITED:
VX DELUXE / VX CRUISER / VX Lock mode of the Yamaha Security System
LIMITED) has been selected. (See page 31 for
Yamaha Security System setting proce-
ECJ01311
dures.)
Do not run the engine over 4000 r/min on  Clip is removed from the engine shut-off
land. Also, do not run the engine for more switch.
than 15 seconds without supplying water,  Throttle lever is squeezed.
otherwise the engine could overheat.  Throttle lever is malfunctioning.
 RiDE lever is squeezed.
The engine start/stop switch (red button)
 RiDE lever is malfunctioning.
starts the engine when the switch is pushed
EJU31164
while the engine is stopped, and stops the Engine shut-off switch “ ”
engine when the switch is pushed while the The engine shut-off switch automatically
engine is running. stops the engine when the clip, on the end of
Release the engine start/stop switch as soon the engine shut-off cord (lanyard), is removed
as the engine starts to run. If the engine does from the switch, such as if the operator falls
not start in 5 seconds, release the engine off the watercraft.

32