Page 46 - LIT-18626-12-93

UF4N10E0.book Page 39 Tuesday, September 29, 2020 8:02 AM

Watercraft operation

(2) Lightly squeeze and release the RiDE le- EJU40003
Watercraft operation modes
ver. The “N” (neutral) shift indicator will
be displayed. (VX DELUXE / VX CRUISER /
VX LIMITED)

EJU45891
Reverse assist
The reverse assist is a function for temporar-
ily increasing the engine speed when moving
in reverse, such as to enter the water
smoothly when launching the watercraft from
a trailer.
This function operates after the engine is
started and only if the watercraft is not shifted
VX
into forward.
1
TIP:
Once the watercraft is shifted into forward af-
ter the engine is started, the reverse assist
cannot be operated.
Activating and deactivating the reverse
assist
The activation of the reverse assist can be
confirmed by the reverse assist indicator on
the multifunction information center.
1 “N” (Neutral position)
VX DELUXE / VX CRUISER / VX LIMITED

MPH
RPM
MPH
Reverse Assist +2
RPM
14.3V
1 2
14.3V
1 Reverse assist indicator
1 2 Reverse assist level
1 “N” (Neutral position) To activate the reverse assist:
(1) Start the engine.
TIP:
(2) Squeeze the RiDE lever to the fully open
If the RiDE lever is squeezed continuously,
position, and then push the upper side of
the reverse gate will move to the reverse po-
the “SPEED ADJUST” switch. Once the
sition.
beeper sounds three times and the re-
39