Page 49 - LIT-18626-12-93

UF4N10E0.book Page 42 Tuesday, September 29, 2020 8:02 AM

Watercraft operation

 Push the “CRUISE/NO WAKE” switch. When the drive control mode is locked, a PIN
 Squeeze the throttle lever. must be entered to operate the drive control
 Squeeze the RiDE lever. mode screen.
TIP: To select the maximum watercraft speed set-
The no-wake mode is also deactivated when ting:
the engine is stopped. (1) Select “Speed”.
(2) Select the maximum watercraft speed
EJU46380
Drive control mode setting.
The drive control mode is a function for set-
1
ting the maximum watercraft speed.
The maximum watercraft speed can be se- Drive Control
lected from two settings. Speed
Activating the drive control mode Middle
Activation of the drive control mode can be Low
confirmed by the drive control mode indica-
tor on the multifunction information center.
Save
When the drive control mode is activated, the
drive control mode indicator is shown in light 2
yellow. 1 Maximum watercraft speed setting
2 “Save”
1
(3) Select the “Save” button to complete the
settings and return to the previous dis-
Drive Control play.
Locking the drive control mode
Speed The drive control mode can be locked.
To lock the drive control mode:
Lock (1) Select “Lock”.
(2) Input each digit of the 4-digit PIN, and
then push the “OK” button of the touch-
1 Drive control mode indicator
pad control.
To operate the watercraft using the drive con-
trol mode:
(1) Release the throttle lever and let the en- Enter PIN
gine speed return to idle. * * * *
(2) Activate each drive control mode. 1 2 3
(3) Squeeze the throttle lever. 4 5 6
Selecting the drive control mode settings 7 8 9
The drive control mode setting for the maxi-
0
mum watercraft speed is saved. In addition,
the activation and settings of the drive control
mode can be locked to prevent others from
changing them.

42