Page 86 - LIT-18626-12-93

UF4N10E0.book Page 79 Tuesday, September 29, 2020 8:02 AM

Pre-operation checks

Turn the handlebars as far as possible to the lever returns automatically to its fully closed
right and left to make sure that the jet thrust position when released.
nozzle moves as the handlebars are turned,
and that there is no difference between the
right and left fully turned positions of the jet
thrust nozzle.

EJU42181
Throttle lever checks
Operate the throttle lever several times to
make sure that operation is smooth through-
out the whole range. Also, make sure that the
throttle lever returns automatically to its fully
closed (idle) position when released.

Difference between fully turned posi-
tions of jet thrust nozzle (distances A
and B):
EJU45351
Maximum 5 mm (0.20 in) Yamaha Security System check
(VX DELUXE / VX CRUISER / VX LIMITED)
EJU43213 Make sure that the Yamaha Security System
RiDE lever checks (VX / VX DELUXE /
operates properly. (See page 31 for Yamaha
VX CRUISER / VX LIMITED)
Operate the RiDE lever several times to make Security System setting procedures.)
EJU32664
sure that operation is smooth throughout the Engine shut-off cord (lanyard) check
whole range. Also, make sure that the RiDE Make sure that the engine shut-off cord (lan-
yard) is not damaged. If the cord is damaged,
replace it. WARNING! Never try to repair
the engine shut-off cord (lanyard) or tie it
together. The engine shut-off cord (lan-
yard) may not pull free when the operator

79