Page 90 - LIT-18626-12-93

UF4N10E0.book Page 83 Tuesday, September 29, 2020 8:02 AM

Pre-operation checks

EJU40553 safe distance away from people, objects,
Cooling water pilot outlet check
Make sure that water is discharged from the and other watercraft. [EWJ01860]
VX
cooling water pilot outlet while the engine is
running. (See page 34 for information on the 1 2
cooling water pilot outlet.)
3
4

1 Shift indicator
2 “F” (Forward position)
3 “N” (Neutral position)
4 “R” (Reverse position)
EJU46240
Multifunction information center check
VX DELUXE / VX CRUISER / VX LIMITED
Make sure that the multifunction information
center operates properly. (See page 45, 50
for information on proper operation of the
multifunction information center.)
MPH
EJU43393
Shift system check (VX / VX DELUXE /
RPM
VX CRUISER / VX LIMITED) 2
Operate the throttle lever and RiDE lever, and
check that the watercraft moves or does not 3
14.3V
move according to the displayed shift indica- 4
tor. (See page 36 for shift system operation 1
procedures.) WARNING! To avoid colli- 1 Shift indicator
sions, operate at safe speeds and keep a 2 “F” (Forward position)
3 “N” (Neutral position)
4 “R” (Reverse position)
EJU40172
Engine idling speed check
Start the engine and warm it up. Use the ta-
chometer in the multifunction information
center to make sure that the engine idling
speed is not significantly above or below the
specified range.
Engine idling speed:
1500 ±100 r/min

83