Page 95 - LIT-18626-12-93

UF4N10E0.book Page 88 Tuesday, September 29, 2020 8:02 AM

Operation

(idle) position. (See page 36 for shift system with other powerboats, you need throt-
operation procedures.) tle to steer. A collision could result in se-
VX vere injury or death.
1  When operating at higher speeds, make
gradual turns or slow down before turn-
ing. Sharp high-speed turns may cause
the watercraft to slide sideways or spin,
throwing the operator and passenger(s)
overboard, which could cause an injury.
 VX / VX DELUXE / VX CRUISER / VX
LIMITED: Take early action to avoid col-
lisions. The RiDE system is not a braking
device for avoiding dangerous situa-
1 “F” (Forward position)
tions.
VX DELUXE / VX CRUISER / VX LIMITED
Steering control depends on the combination
of handlebar position and the amount of
throttle.
Water sucked in through the intake grate is
MPH
pressurized by the impeller in the jet pump.
RPM
As the pressurized water is expelled from the
pump through the jet thrust nozzle, it creates
thrust to move and steer the watercraft. The
14.3V
higher the engine speed, the more thrust pro-
1
duced.
1 “F” (Forward position)
The amount of jet thrust, in addition to the po-
sition of the handlebars, determines how
sharply you turn.
A. More throttle produces higher thrust, so
the watercraft will turn more sharply.

EJU43423
Turning the watercraft
EWJ01783

 Do not release the throttle lever when
trying to steer away from objects—as

88