Page 39 - LIT-18626-13-05

UF4P11E0.book Page 33 Friday, October 30, 2020 9:39 AM

Control function operation

To adjust the handlebar position: (2) Make sure that the tilt lever returns to its
(1) Pull the tilt lever up to disengage the han- original position and that the handlebars
dlebar lock, and then move the handle- are securely locked in place.
bars back or forth to the desired position.
WARNING! Never pull the tilt lever dur-
ing operation, otherwise the handle-
bars may suddenly change position,
which may lead to an accident. [EWJ00042]

1
EJU41801
Cooling water pilot outlets
When the engine is running, some of the
cooling water that is circulated in the engine
is discharged from the cooling water pilot
1 Tilt lever outlets.

1
1 Cooling water pilot outlet
There are cooling water pilot outlets on the
port (left) and starboard (right) sides of the
watercraft. To check for proper operation of
the cooling system, make sure that water is
being discharged from the port (left) pilot out-
let. If water is not being discharged from the
outlet, stop the engine and check the jet in-
take for clogging. (See page 103 for informa-
tion on the jet intake.)

33