Page 43 - LIT-18626-13-05

UF4P11E0.book Page 37 Friday, October 30, 2020 9:39 AM

Watercraft operation

TIP: This function can be used only for forward
If the RiDE lever is squeezed while the throttle operation of the watercraft.
lever is squeezed, the watercraft will slow TIP:
down, and once stopped, move in reverse.  When the watercraft is moving in reverse or
To shift into neutral from forward: is in neutral, the jet thrust nozzle will auto-
(1) Release the throttle lever. matically change to the neutral trim setting.
(2) Lightly squeeze and release the RiDE le- When the watercraft is shifted into forward,
ver. The “N” (neutral) shift indicator will the jet thrust nozzle will automatically
be displayed. change to the selected trim setting.
 While the watercraft is in neutral, the
“TRIM/T.D.E.” switch controls the forward
and reverse operation of the T.D.E. (thrust
direction enhancer). (See page 39 for infor-
mation on the T.D.E.)
 The watercraft performance characteristics
according to the trim angle change de-
pending on the operating conditions.
Confirming the trim setting
The trim setting can be confirmed by the trim
setting indicator on the multifunction infor-
mation center.
1
RPM
x1000
MPH
RPM
x1000
14.3V MPH
1
1 “N” (Neutral position) 14.3V
1 Trim setting indicator
TIP:
If the RiDE lever is squeezed continuously, To change the trim setting:
the reverse gate will move to the reverse po- (1) Shift into forward.
sition. (2) Push the upper side of the “TRIM/T.D.E.”
EJU45880 switch to increase the trim setting and
Electric trim system raise the bow, or push the lower side of
The electric trim system is a function for the “TRIM/T.D.E.” switch to decrease the
changing the vertical angle of the jet thrust trim setting and lower the bow. The trim
nozzle to change the trim angle and perfor-
mance characteristics of the watercraft.

37