Page 47 - LIT-18626-13-05

UF4P11E0.book Page 41 Friday, October 30, 2020 9:39 AM

Watercraft operation

gine speed each above and below the initial displayed, the no-wake mode is activat-
engine speed. ed.
This function can be used only when the wa-
tercraft is in neutral, or when the watercraft is
shifted into forward and the engine is operat-
ing at idling speed.
TIP:
If the no-wake mode is activated when the
watercraft is in neutral, the watercraft will au-
tomatically shift into forward and the water-
craft will start moving at a low speed. 1
Activating and deactivating the no-wake
1 “CRUISE/NO WAKE” switch
mode
The activation of the no-wake mode can be (3) Push the upper side or the lower side of
confirmed by the no-wake mode indicator on the “SPEED ADJUST” switch to adjust
the multifunction information center. the engine speed to three settings: “No
Wake –1”, “No Wake” (standard setting),
and “No Wake +1”.

RPM
x1000
MPH
No Wake +1

14.3V
1 2
1 No-wake mode indicator 1
2 No-wake mode level
To activate the no-wake mode: 1 “SPEED ADJUST” switch
(1) Shift into neutral, or release the throttle To deactivate the no-wake mode:
lever and let the engine speed return to Perform one of the following operations. The
idle. beeper sounds two times and the no-wake
(2) Push and hold the “CRUISE/NO WAKE” mode indicator disappears when the no-
switch. Once the beeper sounds three wake mode is deactivated.
times and the no-wake mode indicator is  Push the “CRUISE/NO WAKE” switch.
 Squeeze the throttle lever.
 Squeeze the RiDE lever.
TIP:
The no-wake mode is also deactivated when
the engine is stopped.

41