Page 49 - LIT-18626-13-05

UF4P11E0.book Page 43 Friday, October 30, 2020 9:39 AM

Watercraft operation

The trim icon of the home screen is also speed can be increased or decreased. How-
shown in light yellow. ever, the adjustment is limited to a maximum
of five increments above or below the initial
1
cruise assist setting.
TIP:
The cruise assist can only be set between en-
RPM
x1000 gine speeds of approximately 3000 r/min and
approximately 7000 r/min.
MPH Activating and deactivating the cruise as-
sist
Activation of the cruise assist can be con-
14.3V
firmed by the cruise assist indicator on the
1 Trim icon
multifunction information center.
Locking the drive control mode
The drive control mode can be locked.
To lock the drive control mode:
RPM
(1) Select “Lock”. x1000
(2) Input each digit of the 4-digit PIN, and
then push the “OK” button of the touch- MPH
pad control. Cruise Assist +4
14.3V
Enter PIN 1 2
* * * * 1 Cruise assist indicator
1 2 3 2 Cruise assist level
4 5 6 To activate the cruise assist:
7 8 9 (1) Operate the throttle lever until the de-
0 sired engine speed is reached.
(2) When the engine speed reaches the de-
sired cruise assist setting, push the
To unlock the drive control mode: “CRUISE/NO WAKE” switch. Once the
(1) Select the drive control mode indicator. beeper sounds three times and the
(2) Input each digit of the 4-digit PIN, and
then push the “OK” button of the touch-
pad control.
(3) Select “Lock”.
EJU45930
Cruise assist
The cruise assist is a function for maintaining
a desired engine speed within a fixed range
while operating the watercraft. Once the
cruise assist is activated, the set engine

43