Page 53 - LIT-18626-13-41

UF4M12E0.book Page 46 Tuesday, August 10, 2021 2:03 PM

Instrument operation

1 1 2

RPM RPM
x1000 x1000
MPH MPH

14.3V 14.3V
2 3 4 5
1 Screen tab bar 1 Trim setting indicator
2 Center display 2 Fuel level meter
3 Voltmeter
4 Tachometer
5 Shift indicator
Trim setting indicator
The position of this indicator indicates the
1
trim setting of the jet thrust nozzle. (See page
1 Warning bar
37 for information on the trim setting.)
Screen tab bar Voltmeter
When each symbol is selected, the watercraft
The voltmeter shows the battery voltage.
information, function settings, and other in-
When the battery voltage is normal, the volt-
formation are shown in the center display.
meter displays approximately 14 volts.
(See page 47 for information on each screen.)
If the battery voltage has dropped or risen
Center display significantly, the battery voltage warning will
The center display shows the watercraft in-
activate and the voltage display will blink.
formation, function settings, and other infor-
(See page 50 for information on the battery
mation according to the symbol on the
voltage warning.)
screen tab bar that is selected.
Tachometer
Warning bar The tachometer shows the engine speed us-
The warning bar is shown when an error or
ing the numbers ×1000 RPM (r/min) and the
malfunction is detected.
number of display segments.
Push the “OK” button of the touchpad control
Shift indicator
when the warning symbol is displayed to
This indicator shows the reverse gate shift
show the warning description, error code,
positions: “F” (forward), “N” (neutral), and “R”
and other information in the center display.
(reverse). (See page 35 for shifting proce-
(See page 50 for information about the warn-
dures.)
ing descriptions.)
Fuel level meter
The fuel level meter shows the amount of fuel
remaining in the fuel tank using the number of
display segments.
46