Page 71 - LIT-18626-13-41

UF4M12E0.book Page 64 Tuesday, August 10, 2021 2:03 PM

Operation and handling requirements

(4) Insert the dipstick back into the dipstick (8) Wait approximately 5 minutes to allow
tube completely. Remove the dipstick the engine oil to settle, and then check
again and make sure that the engine oil the engine oil level again.
level is between the minimum and maxi- (9) Repeat steps 3–8 until the engine oil is at
mum level marks. the proper level.
(10) Securely install the engine oil filler cap by
tightening it until it stops.
(11) Securely install the seats in their original
positions.
1
2

1 Maximum level mark
2 Minimum level mark
(5) If the engine oil level is significantly
above the maximum level mark, consult
a Yamaha dealer. If the engine oil level is
below the minimum level mark, add en-
gine oil.
(6) Loosen the engine oil filler cap and re-
move it.

1

1 Engine oil filler cap
(7) Slowly add engine oil.
TIP
The difference between the minimum and
maximum level marks on the dipstick is equal
to approximately 1 L (1.06 US qt, 0.88 Imp.qt)
of engine oil.

64