Page 80 - LIT-18626-14-60

UF7L10E0.book Page 73 Tuesday, June 20, 2023 1:48 PM

Pre-operation checks

than 15 seconds without supplying water,
otherwise the engine could overheat.
Check the engine start/stop switch and the
engine shut-off switch for proper operation.
(See page 31 for information on operating
each switch.)

1
2

EJU45351
Yamaha Security System check
Make sure that the Yamaha Security System
operates properly. (See page 30 for Yamaha
Security System setting procedures.)
EJU32666
Engine shut-off cord (lanyard) check
3
Make sure that the engine shut-off cord (lan-
1 Clip
yard) is not damaged. If the cord is damaged,
2 Engine shut-off switch
replace it. WARNING! Never try to repair 3 Engine shut-off cord (lanyard)
the engine shut-off cord (lanyard) or tie it
together. The engine shut-off cord (lan-
yard) may not pull free when the operator
falls off, allowing the watercraft to contin-
ue to run and cause an accident. [EWJ01222]

1
1 Engine start/stop switch
To check the operation of the switches:
(1) If the lock mode is selected for the
Yamaha Security System setting, select
the unlock mode. (See page 30 for
EJU46050
Switch checks Yamaha Security System setting proce-
ECJ01311
dures.)
(2) Push the engine start/stop switch to
Do not run the engine over 4000 r/min on make sure that the engine starts.
land. Also, do not run the engine for more
(3) As soon as the engine starts running,
push the engine start/stop switch to

73