Page 78 - LIT-18626-14-61

UF7M10E0.book Page 71 Monday, July 10, 2023 3:12 PM

Pre-operation checks

nozzle moves as the handlebars are turned,
and that there is no difference between the
right and left fully turned positions of the jet
thrust nozzle.

EJU42181
Throttle lever checks
Operate the throttle lever several times to
make sure that operation is smooth through-
out the whole range. Also, make sure that the
throttle lever returns automatically to its fully
closed (idle) position when released.

Difference between fully turned posi-
tions of jet thrust nozzle (distances A
and B):
EJU45351
Maximum 5 mm (0.20 in) Yamaha Security System check
Make sure that the Yamaha Security System
EJU43213 operates properly. (See page 30 for Yamaha
RiDE lever checks
Operate the RiDE lever several times to make Security System setting procedures.)
EJU32666
sure that operation is smooth throughout the Engine shut-off cord (lanyard) check
whole range. Also, make sure that the RiDE Make sure that the engine shut-off cord (lan-
lever returns automatically to its fully closed yard) is not damaged. If the cord is damaged,
position when released. replace it. WARNING! Never try to repair
the engine shut-off cord (lanyard) or tie it
together. The engine shut-off cord (lan-
yard) may not pull free when the operator
falls off, allowing the watercraft to contin-
ue to run and cause an accident. [EWJ01222]

71