Page 44 - LIT-18626-14-64

UF6C12E0.book Page 38 Wednesday, July 19, 2023 11:58 AM

Instrument operation

To switch the speedometer display
units: 1
Start the engine, stop the engine, and then
remove and insert the clip 3 times before the
multifunction information center turns off.
The speedometer display units change.
To switch the speedometer display units
again, repeat this procedure.

1 Tachometer
2
TIP
While the engine is stopped, the battery volt-
age and the total engine hours are displayed
1
alternately.
EJU43891
Shift indicator
This indicator shows the reverse gate shift
1 Clip
positions: “F” (forward), “N” (neutral), and “R”
2 Engine shut-off switch
(reverse). (See page 33 for shifting proce-
dures.)

1

2

3
1
1 Speedometer 4
EJU44650 1 Shift indicator
Tachometer 2 “F” (Forward position)
The tachometer shows the engine speed. 3 “N” (Neutral position)
4 “R” (Reverse position)
EJU47181
Trim indicator
This indicator shows the trim angle of the jet
thrust nozzle. When the neutral position of
the jet thrust nozzle is selected, the trim indi-
cator shows the segment next to the trim
icon. Increasing the trim angle will show the

38