Page 54 - LIT-18626-15-21

UF7K11E0.book Page 42 Monday, June 17, 2024 7:03 PM

Watercraft operation

EJU47362 To operate the watercraft using the drive
Drive control mode
control mode:
The drive control mode is a function for set-
ting the maximum watercraft speed and ac- (1) Release the throttle lever and let the en-
celeration for stable towing, and to adjust the gine speed return to idle.
trim angle automatically. (2) Activate each drive control mode.
The drive control mode can be selected from (3) Squeeze the throttle lever.
the following. Setting the custom mode
 “ ” The custom mode settings for the maximum
 “ ” watercraft speed and acceleration are saved.
 “ ” In addition, the activation and settings of the
 “ ” custom mode can be locked to prevent oth-
 “ ” ers from changing them.
When the lock is set, the custom settings
TIP
cannot be changed. Release the lock to
 The watercraft speed setting is a target val-
change the settings.
ue. The actual watercraft speed may vary
depending on the operating conditions. To select the maximum watercraft speed
 “ ” and “ ” cannot and acceleration settings:
change the speed and acceleration. (1) Select “ ” for the maximum watercraft
 The color theme is changed depending on speed.
the selected mode.
Activating the drive control mode
Custom Mode
Activation of the drive control mode can be
confirmed by the drive control mode indica-
60 MEDIUM OFF
tor on the multifunction information center. MPH Acceleration
When the drive control mode is activated, the
Custom Auto Trim Off
drive control mode indicator is shown in light
yellow.
1 1
1 Maximum watercraft speed
(2) Set the desired maximum watercraft
speed, and select “ ”.
F
Economy Performance
Comfort Tow
Custom
OFF E
1 Drive control mode indicator

42