Page 41 - LIT-18626-15-23

UF7L11E0.book Page 31 Wednesday, June 26, 2024 6:04 PM

Control function operation

start/stop switch, wait 15 seconds, and then
try again.
1

2
3
1 1 Engine shut-off switch
2 Clip
1 Engine start/stop switch 3 Engine shut-off cord (lanyard)
The engine will not start under any of the fol- When the engine is not running, remove the
lowing conditions: clip from the engine shut-off switch to pre-
 Lock mode of the Yamaha Security System vent accidental starting or unauthorized op-
has been selected. (See page 30 for eration by children or others.
Yamaha Security System setting proce-
dures.)
 Clip is removed from the engine shut-off
switch.
 Throttle lever is squeezed.
 Throttle lever is malfunctioning.
 RiDE lever is squeezed.
 RiDE lever is malfunctioning.
EJU31165
Engine shut-off switch “ ”
The engine shut-off switch automatically
stops the engine when the clip, on the end of TIP
the engine shut-off cord (lanyard), is removed It is recommended that a spare engine shut-
from the switch, such as if the operator falls off cord (lanyard) be stored in the glove com-
off the watercraft. partment to allow a passenger to restart the
Insert the clip under the engine shut-off watercraft if the operator falls from the water-
switch before starting the engine. craft.
EJU31212
Throttle lever
The throttle lever increases the engine speed
when the lever is squeezed.

31