Page 52 - LIT-18626-15-23

UF7L11E0.book Page 42 Wednesday, June 26, 2024 6:04 PM

Watercraft operation

EJU47551 To operate the watercraft using the drive
Drive control mode
control mode:
The drive control mode is a function for set-
ting the maximum watercraft speed and ac- (1) Release the throttle lever and let the en-
celeration for stable towing, and to adjust the gine speed return to idle.
trim angle automatically. (2) Turn the drive control mode on.
The maximum watercraft speed can be se- (3) Squeeze the throttle lever.
lected from three settings and the accelera- Selecting the drive control mode settings
tion can be selected from two settings. The drive control mode settings for the max-
Activating the drive control mode imum watercraft speed and acceleration are
Activation of the drive control mode can be saved. In addition, the activation and settings
confirmed by the drive control mode indica- of the drive control mode can be locked to
tor on the multifunction information center. prevent others from changing them.
When the drive control mode is activated, the When the drive control mode is locked, a PIN
drive control mode indicator is shown in light must be entered to operate the drive control
green. mode screen.
To select the maximum watercraft speed
1
setting:
Select the maximum watercraft speed limit
(“Speed”), and set the desired speed.

1

1 Drive control mode indicator
To activate the drive control mode:
(1) Select the drive control mode indicator.
(2) Select the “ ” toggle switch,
and then push the “OK” button on the 1 Maximum watercraft speed setting
touchpad control. To select the acceleration:
The buzzer sounds three times and the drive Select the acceleration (“Accel.”), and set the
control mode is activated. desired setting.
To cancel the drive control mode:
(1) Select the drive control mode indicator.
(2) Select the “ ” toggle switch,
and then push the “OK” button on the
touchpad control.
The buzzer sounds two times and the drive
control mode is cancelled.

42