Page 63 - LIT-18626-15-23

UF7L11E0.book Page 53 Wednesday, June 26, 2024 6:04 PM

Instrument operation

TIP To change notification settings for in-
The pop-up screen will close automatically coming calls:
after a few seconds. (1) Select “Notifications”, and then push the
“OK” button of the touchpad control.
To change notification settings for in-
(2) Select “Phone Calls”.
coming messages:
(3) Push the “OK” button on the touchpad
(1) Select “Notifications”, and then push the
control and toggle the toggle switch
“OK” button of the touchpad control.
ON/OFF. Set it to “ON” to enable notifi-
(2) Select “Text Messages”.
cations, and “OFF” to disable notifica-
(3) Push the “OK” button on the touchpad tions.
control and toggle the toggle switch
ON/OFF. Set it to “ON” to enable notifi-
cations, and “OFF” to disable notifica-
tions.

Displaying the time since the last mainte-
nance (“Wellness”)
The total number of hours that the engine has
been running since the last watercraft main-
TIP tenance can be displayed.
 Notifications from devices are supported in
the following languages: English, French,
Spanish, German, Italian, Portuguese,
Greek, Swedish, and Japanese.
 See page 49 for the method for displaying
notification information.

Depending on the device, notification set-
tings on the device may be disabled. If they
are disabled, try the procedure below.
(1) Open the device's Bluetooth settings.
To reset the number of hours of opera-
(2) Display the information of “WAVERUN-
tion:
NER”.
Select “Reset”, and then push the “OK” but-
(3) Enable notification settings. ton of the touchpad control.
(4) Shut down the multifunction display.
(5) Activate the multifunction display.

53