Page 63 - LIT-18626-15-24

UF7M11E0.book Page 53 Friday, June 7, 2024 11:25 AM

Instrument operation

If the battery voltage warning is activated, If the engine overheat warning is activated,
have the watercraft serviced by a Yamaha immediately reduce the engine speed, return
dealer as soon as possible. to shore, and then make sure that water is
Check engine warning “ ” being discharged from the port (left) cooling
If a sensor malfunction or a short circuit is water pilot outlet while the engine is running.
detected, “ ” is shown in the warning bar, If there is no discharge of water, stop the en-
and the buzzer sounds intermittently. gine, and then check the jet intake for clog-
ging. (See page 107 for information on the jet
intake.) NOTICE: If you cannot locate and
correct the cause of the overheating, con-
sult a Yamaha dealer. Continuing to oper-
ate at higher speeds could result in severe
engine damage. [ECJ00042]

If the check engine warning is activated, im-
mediately reduce the engine speed, return to
shore, and have a Yamaha dealer check the
engine.
TIP
Push the “OK” button of the touchpad control
to display a description of the warning in the TIP
center display.  While the engine overheat warning is acti-
vated, the maximum engine speed is limit-
Engine overheat warning “ ” ed.
If the engine temperature rises
 Push the “OK” button of the touchpad con-
significantly, “ ” and “ ” are shown in the
trol to display a description of the warning
warning bar, and the buzzer sounds continu-
in the center display.
ously.
Oil pressure warning “ ”
If the oil pressure drops significantly, “ ”
and “ ” are shown in the warning bar, and
the buzzer sounds intermittently.

53