Page 98 - LIT-18626-15-27

UF5S10E0.book Page 88 Monday, September 23, 2024 2:13 PM

Operation

proximately 80 m (260 ft) after the throttle le- before using the RiDE lever to slow
ver is released or the engine is stopped, down or stop the watercraft.
although this distance will vary depending on
EJU43447
many factors, including gross weight, water Operating the watercraft in reverse or
surface conditions, and wind direction. neutral (JETBLASTER DLX /
JETBLASTER LTD)
Operating in reverse
When the RiDE lever is squeezed, the “R” (re-
80 m (260 ft)
verse) shift indicator will be displayed and the
watercraft will move in reverse. (See page 35
for shift system operation procedures.)
JETBLASTER DLX
1

JETBLASTER DLX / JETBLASTER LTD: If the
RiDE lever is squeezed to slow down, the
stopping distance is approximately 30%
shorter than when the RiDE lever is not used.
However, this distance will vary depending
on many factors, including gross weight, wa-
ter surface conditions, and wind direction.
1 “R” (Reverse position)
EWJ01794
JETBLASTER LTD
 Allow adequate stopping distance. Stay
far enough away from others so you can
always safely coast to a stop.
 Take early action to avoid collisions. Re- RPM x1000
member, watercraft and other boats do
not have brakes. MPH
 Operate defensively at safe speeds and
keep a safe distance away from people, 14.3v
objects, and other watercraft to give you 1
time to stop.
1 “R” (Reverse position)
 Do not shut the engine off when slowing
down in case you need engine power to
steer away from a boat or other obstacle
that comes into your path.
 JETBLASTER DLX / JETBLASTER LTD:
To avoid rear-end collisions while oper-
ating the watercraft, check behind you

88