Page 49 - LIT-18626-12-56

Pre-operation checks

pouch is securely installed. (See page 27 for EJU32353
Hull and deck check
information on the storage pouch.)
Check the hull and deck for damage or other
EJU41072
Fire extinguisher container checks problem.
Make sure that the fire extinguisher container EJU32657
Jet intake checks
is not damaged and is securely held in place.
Make sure that the jet intake is not damaged
(See page 28 for information on the fire extin-
or clogged with weeds or debris. If the jet in-
guisher container.)
take is clogged, clean it. (See page 70 for in-
EJU32494
Fire extinguisher check formation on the jet intake.)
Check that there is a full fire extinguisher on EJU40703
Hood check
board.
Make sure that the hood is securely closed.
(See page 26 for information on the hood.)

To check the fire extinguisher, see the in-
structions supplied by the fire extinguisher EJU40146
manufacturer. Always keep the fire extin- Post-launch checks
guisher in the fire extinguisher container. Perform the post-launch checks in the pre-
Always carry a fire extinguisher on board. A operation checklist while the watercraft is in
fire extinguisher is not standard equipment the water and the engine is running.
with this watercraft. If you do not have one, To perform the post-launch checks:
contact a Yamaha dealer or a fire extinguish- (1) Launch the watercraft. (See page 45 for
er dealer to obtain one meeting the proper information on launching the watercraft.)
specifications. (2) Perform the checks and make sure that
there are no malfunctioning items or oth-
Fire extinguisher: er problems.
Classification:
B-1
Capacity:
2 lb or more

EJU40122
Safety equipment check
Check that safety equipment meeting the ap-
plicable regulations is on board.

42