Page 55 - LIT-18626-13-38

UF3X13E0.book Page 46 Tuesday, September 28, 2021 12:57 PM

Instrument operation

EJU46620
Multifunction information TIP
The multifunction information center is turned
center
on, even if the engine start/stop switch is also
The multifunction information center displays
pushed briefly.
various watercraft information.
The multifunction information center is a Turning off the multifunction information
touch screen that you can touch directly to center
turn the various functions on or off or change If no operations are performed for about 50
settings. You can also perform operations seconds after the engine stops, a message
using the touchpad control. appears on the multifunction information
The language and display units shown can be center. Select “Shutdown” on the displayed
changed. (See page 61 for information on message to turn off the multifunction infor-
changing the language and display units.) In mation center.
the illustrations in this manual, English is used
for the language and US units are used for the Entering Accessory Mode
display units.
Engine is off. Vehicle will now be draining battery power.
EWJ01980
Would you like to continue? If no selection is made,
vehicle will shutdown.
For safety, do not touch the multifunction
information center while the watercraft is Continue Shutdown
moving. Otherwise, you could lose control
of the watercraft, which may lead to an ac- 1
cident.
1 “Shutdown”
TIP
TIP
The multifunction information center does not
If there is no operation input within 20 sec-
receive operation input while the watercraft is
onds after the message is displayed, the mul-
moving. Before operating the multifunction
tifunction information center turns off.
information center, stop the watercraft and
check the area around you to make sure it is Turning accessory mode on and off
safe to operate the center. When accessory mode is turned on, the mul-
tifunction information center can be operated
Turning on the multifunction information even if the engine is stopped.
center To turn on accessory mode, select “Contin-
When the engine start/stop switch is pushed,
ue” on the message that appears on the me-
the multifunction information center turns on.
ter after the engine stops.
After the logo is displayed for a few seconds
followed by a disclaimer, select “CONFIRM”
to display the home screen.

46